Equilibria & Le Chateliers Principle (2024)

Equilibria & Le Chateliers Principle Revision

Equilibria and Le Châtelier’s Principle

Chemical equilibrium is a fascinating phenomenon in chemical reactions. In these systems, both forwards and backwards reactions happen at the same time. The positions of equilibrium (how far towards products or reactants a reaction is) can be greatly affected by the conditions under which the reactions takes place. How equilibrium responds to external conditions is governed by Le Châteliers principle.

Equilibrium

Many chemical reactions arereversible. This means that reaction can take place in both theforwards andbackwardsdirection. For example, the reaction between hydrogen and iodine can take place both directions:

\begin{aligned}\text{H}_2+\text{I}_2&\rarr2\text{HI}\\2\text{HI}&\rarr\text{H}_2+\text{I}_2\end{aligned}

At equilibrium, both reactions will happen simultaneously with equal rates of reaction. This is known as dynamicequilibrium. We represent this in the chemical equation by using two parallel arrows, pointing in the opposite direction:

\text{H}_2+\text{I}_2\rightleftharpoons 2\text{HI}

In reactions that are taking place under dynamic equilibrium, the concentrations of bothreactantsandproducts will remain constant. This is because they are being both formed and used up at the same rate.

A LevelAS LevelAQA

A Level Chemistry

AQA A Level Chemistry Predicted Papers 2025

14

£15.99

AQA A Level Chemistry predicted papers with mark schemes. A great way to practice for your exams. The profit from every set is reinvested into making free content on MME, which benefits millions of learners across the country.

View Product

Equilibria & Le Chateliers Principle (2)
Equilibria & Le Chateliers Principle (3)

Le Châtelier’s Principle

Le Châtelier’s principle governs the responses of chemical equilibria to changes in their conditions.

Le Châtelier’s Principle: Equilibria will change their position to counteract any change in their conditions.

What this means in practice is that, in response to an external change, an equilibrium reaction will move further towards which ever side of the reaction best opposes this change. For example, the temperature of an equilibrium redaction takes place, the equilibrium will shift to the endothermic side of the reaction (i.e. whatever side produces the lowest temperature). This shift will lead to an increase in either the products or the reactants of the reaction.

Le Châtelier’s principle is extremely useful in industrial chemistry as it allows us to manipulate reactions to produce as much product as possible.

A LevelAS LevelAQA

Effects of Pressure

Increase in Pressure

If the pressure of a system is increased, the equilibrium opposes the change by shiftingto the side which produces the fewest molesof gas to reduce the pressure.

Equilibria & Le Chateliers Principle (4)

Decrease in Pressure

If the pressure of a system is decreased, the equilibrium opposes the change by shifting to the side which produces the most moles of gas to increase the pressure.

Equilibria & Le Chateliers Principle (5)

In some cases, the moles of gas are equal on both sides. If these cases changes in pressure will have no effect on the position of theequilibrium.

Industries will sometimes induce high pressures to increase the yield of a product. However this is only possible up to a certain pressure. Higher pressures are more expensive to maintain due to the need to ensure safety, as well as to supply the energy required to induce a high pressure.

A LevelAS LevelAQA

Effects of Temperature

Increase in Temperature

If the temperature of a system is increased, the equilibrium shifts in the endothermic direction to oppose the change and reduce the temperature by absorbing heat.

Decrease in Temperature

If the temperature of a system is decreased, the equilibrium shifts in the exothermic direction to oppose the change and increase the temperature by giving out heat.

For example, take the formation of methanol:

\text{CO}_{(g)}+2\text{H}_{2 (g)}\rightleftharpoons\text{CH}_3\text{OH}_{(g)} [\Delta\text{H}=-90\text{ kJ mol}^{-1}]

In the above equilibrium, the forward reaction is exothermic. Therefore if temperature is increased the backwards reaction would be favoured since it is endothermic.

A LevelAS LevelAQA

Effects of Concentration

\text{H}_{2\left(\text{g}\right)}+\text{I}_{2\left(\text{g}\right)}\leftrightarrows2\text{HI}_{\left(\text{g}\right)}

Increasing the concentration of \text{I}_2 will cause the equilibrium to shift to the right to oppose the change by removing the excess and decrease the concentration of \text{I}_2 ions. This would give a higher yield of \text{HI}. Decreasing the concentration of \text{I}_2 would cause a shift to the left to replace the loss. This reduces the yield of \text{HI}

A LevelAS LevelAQA

Effects of Catalysts

Catalysts do not affect the position of equilibrium as they speed up the rate of the reaction of both the forward and backward reaction by the same amount. Catalysts will however cause the system to reach equilibrium more quickly.

A LevelAS LevelAQA

Industrial Processes

Le Châtelier’s principle is used in industry to maximise yield. You need to know about how Le Châtelier’s principle is applied to the following industrial processes. Though you will not need to know the values of the enthalpy changes for these reactions, you do need to know the chemical equations involved and the effects that changing conditions will have on them.

Contact Process

\begin{aligned}\text{Stage 1: S}_{(s)}+\text{O}_{2 (g)}&\rarr\text{SO}_{2 (g)}\\\text{Stage 2: SO}_{2 (g)}+\frac{1}{2}\text{O}_{2 (g)}&\rightleftharpoons\text{SO}_{3 (g)}\end{aligned}

\Delta\text{H}=-97 \text{ kJ mol}^{-1}

Conditions

  • Temperature: 450\degree\text{C}
  • Pressure: 1-2\text{ atm}
  • Catalyst: \text{V}_2\text{O}_5

Temperature: Stage 2 of the contact process is exothermicso a low temperature is needed to increase the yield. However, a low temperature would cause a slow rate so a compromise is made of 450\degree\text{C}.

Pressure: Having a high pressure would lead to high energycosts for marginal gains. This is because the effect of high pressure on yield is only slightly better.

Haber Process

\text{N}_{2\left(\text{g}\right)}+3\text{H}_{2\left(\text{g}\right)}\rightleftharpoons2\text{NH}_{3\left(\text{g}\right)}

\Delta\text{H}=-92\text{ kJ mol}^{-1}

Conditions

  • Temperature: 450\degree\text{C}
  • Pressure: 200-1000\text{ atm}
  • Catalyst: Iron

Temperature: The Haber Process is exothermic so a low temperature is needed to increase the yield. However, a low temperature would cause a slow rate so a compromise is made of 450℃.

Pressure: Having a high pressure would lead to a higher yield as there are fewer moles of gas on the right. Therefore, high pressure is used. The pressure used is not too high because it would be expensive to maintain.

Hydration of Ethene

\text{C}_2\text{H}_{4\left(\text{g}\right)}+\text{H}_2\text{O}_{\left(\text{g}\right)}\rightleftharpoons\text{CH}_3\text{CH}_2\text{OH}_{\left(\text{l}\right)}

Conditions

  • Temperature: 300\degree\text{C}
  • Pressure: 60-70\text{ atm}
  • Catalyst: Concentrated Phosphoric Acid

Temperature: The hydration of ethene is exothermic so a low temperature is needed to increase the yield. However, a low temperature would cause a slow rate so a compromise is made of 300\degree\text{C}.

Pressure: Having a high pressure would lead to a higher yield as there are fewer moles on the right so a high pressure is used. However, too high a pressure would lead to ethene being polymerised so a compromise of 60-70\text{ atm} is made.

Production of Methanol

\text{CO}_{\left(\text{g}\right)}+2\text{H}_{2\left(\text{g}\right)}\rightleftharpoons\text{CH}_3\text{OH}_{\left(\text{g}\right)}

Conditions

  • Temperature: 400\degree\text{C}
  • Pressure: 50\text{ atm}
  • Catalyst: Chromium and zinc oxides

Temperature: The production of methanol is exothermic so a low temperature is needed to increase the yield. However, a low temperature would cause a slow rate so a compromise is made of 400\degree\text{C}.

Pressure: Having a high pressure would lead to a higher yield as there are fewer moles on the right so a high pressure is used. The pressure used is not too high because it would be expensive to maintain.

Note: In industry, unreacted reactants are often recycled back into the reactor to improve the yield.

A LevelAS LevelAQA

Equilibria & Le Chateliers Principle Example Questions

Question 1: What effect would increasing pressure have on the yield of \text{NO}_2.

\text{N}_2\text{O}_{4\left(\text{g}\right)}\leftrightarrows2\text{NO}_{2\left(\text{g}\right)}

[3 marks]

A LevelAS LevelAQA

  • The equilibrium will shift to oppose the change and reduce the pressure.
  • So will shift to the left since there are fewer moles of gas; there is 1 mole on the left and 2 moles on the right.
  • Gives a lower yield of \text{NO}_2

Equilibria & Le Chateliers Principle (8)

Save your answers with

Equilibria & Le Chateliers Principle (9)

Gold Standard Education

Sign Up Now

Still marking manually? Save your answers with

Equilibria & Le Chateliers Principle (10)Find out more

Question 2: There are two stages in the manufacture of methanol. The first stage involves the reaction of methane with water as shown in the following equation.

\text{CH}_{4\left(\text{g}\right)}+\text{H}_2\text{O}_{\left(\text{g}\right)}\leftrightarrows\text{CO}_{\left(\text{g}\right)}+3\text{H}_{2\left(\text{g}\right)}

\Delta\text{H}=+211\text{ kJ mol}^{-1}

Discuss, with reason, the effects of separately increasing the pressure and temperature on the yield of the products and on the rate of the reaction.

[6 marks]

A LevelAS LevelAQA

  • High pressure = Equilibrium shifts to the left/ lower yield
  • High pressure = Increased rate
  • Increased pressure does this because there are more moles of gas on the right.
  • High temp = Equilibrium shifts to the right/ yield is greater
  • High temp = Increased rate
  • High temp does this because the reaction is endothermic.

Equilibria & Le Chateliers Principle (11)

Save your answers with

Equilibria & Le Chateliers Principle (12)

Gold Standard Education

Sign Up Now

Still marking manually? Save your answers with

Equilibria & Le Chateliers Principle (13)Find out more

Question 3: In the Haber Process, ammonia is produced according to the following equation.

\text{N}_{2\left(\text{g}\right)}+3\text{H}_{2\left(\text{g}\right)}\leftrightarrows2\text{NH}_{3\left(\text{g}\right)}

\Delta_{\text{f}}\text{H}^{\varnothing}=-92\text{ kJ mol}^{-1}

The usual conditions are 450\degree\text{C} and 20\text{ MPa}. Explain why 450\degree\text{C} is a compromise temperature and why 20\text{ MPa} is a compromise pressure.

[6 marks]

A LevelAS LevelAQA

Temperature

  • The reaction is exothermic.
  • A high temperature lowers the yield.
  • But a higher temperature leads to a higher rate of reaction.

Pressure

  • 4 moles of gaseous reactants form 2 moles of gaseous product.
  • A high pressure increases the yield.
  • But a higher pressure generation and equipment is expensive.

Equilibria & Le Chateliers Principle (14)

Save your answers with

Equilibria & Le Chateliers Principle (15)

Gold Standard Education

Sign Up Now

Still marking manually? Save your answers with

Equilibria & Le Chateliers Principle (16)Find out more

Equilibria & Le Chateliers Principle (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Rev. Leonie Wyman

Last Updated:

Views: 5263

Rating: 4.9 / 5 (59 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Rev. Leonie Wyman

Birthday: 1993-07-01

Address: Suite 763 6272 Lang Bypass, New Xochitlport, VT 72704-3308

Phone: +22014484519944

Job: Banking Officer

Hobby: Sailing, Gaming, Basketball, Calligraphy, Mycology, Astronomy, Juggling

Introduction: My name is Rev. Leonie Wyman, I am a colorful, tasty, splendid, fair, witty, gorgeous, splendid person who loves writing and wants to share my knowledge and understanding with you.